Ted conf.ini and ATI instructions

[AG-51_Cobraj]

Before you start, download and install  "Driver Sweeper" http://www.guru3d.com/content-page/guru3d-driver-sweeper.html


****The AMD Catalyst Control Center / AMD Vision Engine Control Center requires that the Microsoft

[AG-51_Cobraj]

Questions? post away bud.

[AG-51_Ted]

The driver you linked is for the 32 bit version of Vista, I'm 64 bit Win 7, does that make a difference?

The only 9.10 64 bit version available is alo for Vista, is this an issue?

Thanks for all the help!

T

[AG-51_Ted]

"12. Copy the "atioglxx.dll" file I provided and Paste it in IL-2's main folder"


I don't see this attachement anywhere...did I miss it?

[AG-51_Cobraj]

Sorry for some reason i didnt post the modified post i made with the link for atiogl file. I'm away  of course now but will straighten this out to tonight.

Try this instead of this old version and old directions.

Use config I sent but if it won't boot il-2 you will have to find the line GL = ???????  And replace the atiog6 or whatever line with the file name at the end of that line. I forget what it is but it's the stock line so look in an old conf.ini for what it should be.

Download the newest  CCC suite for 64 bit. I would use the newest Beta 13.xx I think it was. Use the conf.ini i posted because the line I talked about above should be right for 64 bit even with newer drivers.

Uninstall your old driver again using the directions above in first post.

Sorry for the confusion. I didn't finish researching and posting this until 5:30am that's why stuff is not complete. Very sorry.

I want to this older version driver first but we should just try the newest version and change the CCC settings to what I posted. Also use conf.ini I attached.

Let me know if you need help or questions. I'll be on my phone watching.

[AG-51_Cobraj]

Add to conf.ini:

Find section>            [game]
Add line>                  SubTitlesLines=2


Add this below at the end of everything, last in list>

[Mods]
SpeedbarUnits=2
SpeedbarSpdKMH=1
SpeedbarSpdMPH=1
SpeedbarSpdKnots=1
SpeedbarAltMeters=1
SpeedbarAltFeet=1
SpeedbarTAS=1
HUDGauges=2
DumpFuel=1


[quick]
Custom0=Korea
Custom1=KoreaWinter
Custom2=Slot44
Custom3=NewGuinea
Custom4=Midway
Custom5=Burma
Custom6=Hawaii
Custom7=
Custom8=
Custom9=
Custom10=
Custom11=
Custom12=
[QMB]
PlaneList=0

[Badger]

Heya Skipper.  Is this something that would be good for my laptop when I get it back up and running?  Or is this what we tried and wouldn't load?

[AG-51_Cobraj]

No, we tried that

[Badger]

Roger that.