A-10C Consolidated Training Startup Checklist
LF= Left Front of Cockpit
LM= Left Middle of Cockpit
RF= Right Front of Cockpit
RM= Right Middle of Cockpit
LFD= Left Front Dash
CFD= Center front dash
RFD= Right Front Dash
UFC= Upfront Control Panel
HUD= Heads Up Display
PRE-ENGINE START
1. RF- Battery Switch: Set to power
2. RF- Inverter Switch: Set to standby
3. Clear Master Caution Warning caused by left generator coming online (Lctrl-m)
4. RM- External Position Lights: Set to Flash
5. HOTAS THROTTLE- External Lights: Set to On [Set Pinky Switch aft. (Lcntrl-p)]
6. RF- Canopy: Close and Lock (verify canopy light extinguished. Lcntrl-c)
7. LF- Fuel System Boost Pumps Main L/R: Set to on
8. LF- Fuel System Boost Pumps Wing L/R: Set to on
9. LM- APU Starter Switch Engage: APU start and monitor EGT & RPM
10. RF- APU Generator Switch: Set generator to power (once RPM reaches 100%)
11. RF- AC Engine Generator switches L/R: Set to power
12. RM- Control Display Unit (CDU): Set to on
13. RM- Embedded GPS/INS (EGI): Set to on
14. LFD- Central Interface Control Unit (CICU): Set to on
15. LFD- Integrated Flight and Fire Control Computer (IFFCC): Set to test mode
16. LFD