Airgroup 51

ADMIN only (Secure Admins only view) => ADMIN Board (Secure Admins only view) => IL-2 1946 Technical Dept. (Public) => Topic started by: AG-51_Thud on April 23, 2012, 06:46:38 AM

Title: Problem using Mission Builder
Post by: AG-51_Thud on April 23, 2012, 06:46:38 AM

Hoping someone else has experienced this problem and can advise how to correct.  Whenever I go to full mission builder I am unable to see any maps or able to use any of the tools.  If I select file the only option is Exit which will not exit the game.  The only way for me to exit  is to use Task Manager to abort the program.  I also tried removing the settings from JSMGE and switching to Windowed Mode.  Any ideas how to correct?

Title: Re: Problem using Mission Builder
Post by: AG-51_Razor on April 23, 2012, 09:12:52 AM

So, after disabling all the jsgme mods, it still doesn't work? I think you have to have something enabled on the right side, such as the default game, or HSFX5.0. I can say that one little mod that I had installed before used to mess with my FMB a bit. It would prevent me from being able to select an object in the 3D view. Very frustrating! I hope you get this figured out Thud.

Title: Re: Problem using Mission Builder
Post by: Hatter on April 23, 2012, 11:13:21 AM

It's an issue with the bldconfig file. I bet if you open yours it's blank. Ask me how I know... :toothy3:

Try dropping mine in your main Il2 folder and see if it works. Back up yours up first of course.

Title: Re: Problem using Mission Builder
Post by: AG-51_Thud on April 23, 2012, 04:03:35 PM

Hooooly Crap!  Direct Hit, Target destroyed.  That was it Hatter.  Mine was empty so I replaced it with yours and now it works!!  Thank you.   :thumbsup:

Title: Re: Problem using Mission Builder
Post by: AG-51_Razor on April 23, 2012, 04:52:02 PM

Nice one Hatter!  :thumbsup:

Title: Re: Problem using Mission Builder
Post by: Hatter on April 23, 2012, 05:07:48 PM

Yeah, I don't know how it happens, but something ate my config.ini and bldconfi files one day. The same thing happened when I opened the FMB.

I was about to delete my Il2 when I looked in the files and found them blank. It's probably a good idea to have them backed up (I know I do now). :thumbsup:

Title: Re: Problem using Mission Builder
Post by: AG-51_Cobraj on April 23, 2012, 05:25:10 PM

Nice Hatter!

Title: Re: Problem using Mission Builder
Post by: AG-51_Bulldog on April 23, 2012, 08:53:03 PM

Hatter you keep that up Cobraj might loose his job!!!!  :glasses3:

Title: Re: Problem using Mission Builder
Post by: AG-51_Hoss on April 23, 2012, 09:30:18 PM

another great idea is to back up your missions too.................. nothing like the feeling of when you have spent hours populating a map, putting up flights, testing to make sure everything works correctly, and then Brain Fart and delete it by accident, or by no fault of your own.