Airgroup 51

General Forums (Public) => General Discussion (Public) => Topic started by: AG-51_Thud on March 17, 2017, 09:04:40 AM

Title: Finally!!
Post by: AG-51_Thud on March 17, 2017, 09:04:40 AM

Picked it up from a hover, delivered it, and landed.  Finally!!   :tongue11:

Title: Re: Finally!!
Post by: AG-51_Razor on March 17, 2017, 09:30:22 AM

Excellent!  :thumbsup:

Title: Re: Finally!!
Post by: AG-51_Sabot on March 17, 2017, 09:53:37 AM

Aimbot cheat

Title: Re: Finally!!
Post by: AG-51_Bulldog on March 17, 2017, 11:30:13 AM

Totally Awesome... Sling loads can be tricky business... Actually getting them delivered and safely set down and unhooked without damaging the package can be the tricky part... That was a large pallet of sand bags fairly heavy load, Great Job!!!!

Title: Re: Finally!!
Post by: AG-51_Thud on March 17, 2017, 01:01:35 PM

I noticed that the flight controls stop working after you apply force trim settings.  Happened numerous times today.  If I don't mess with trims I had no issues.

Title: Re: Finally!!
Post by: AG-51_Bulldog on March 17, 2017, 03:35:06 PM

When you use trim - When in level flight or hover you hit pilot trim and immediately let stick return to center, then you make small corrections from there. If things seem to go array then hit your trim reset and get reestablished. Usually when things get stuck is when there is to much clicking going on... Usually to a small self predicating since of anxiety due to the knowledge of the inevitable crash that you see coming and there is nothing that you think you can do about it...LOL.. If anything else it may be in your button settings make sure they are correctly assigned.. :glasses3:

Title: Re: Finally!!
Post by: AG-51_Thud on March 17, 2017, 03:39:18 PM

The stick, collective, and rudders completely stop working as well as turning force trim on or off. Some times it starts working after a long pause, other times not.

Title: Re: Finally!!
Post by: AG-51_Bulldog on March 17, 2017, 07:09:37 PM

Force trim should be turned on at start up and then left alone!!! From then on trim is managed through your pilot trim, and trimmer reset!!!

Title: Re: Finally!!
Post by: AG-51_Thud on March 17, 2017, 07:41:34 PM

IT
STOPS
WORKING
ALL
BY
IT'S
FUCKING
SELF
 :violent1:

Title: Re: Finally!!
Post by: AG-51_Sabot on March 18, 2017, 09:39:14 AM

Told you it was a Aimbot....

I'm having a hellava time getting my Keyboard bindings to stick in the Mirage,even after I save the profile.

Wonder if it was after the latest "update"

Title: Re: Finally!!
Post by: AG-51_Thud on March 18, 2017, 10:48:03 AM

I updated the release and deleted/reloaded the saitek drivers this morning. So far so good. 

Title: Re: Finally!!
Post by: AG-51_Bulldog on March 18, 2017, 11:33:24 AM

Every once in a while I will have the same thing happen. I will set trim and not be able to reset. However for the most part a quick click on the reset button and you will have full range of movement again!! :glasses3:

Title: Re: Finally!!
Post by: AG-51_Thud on March 19, 2017, 08:08:05 PM

Oh yeh!  Delivered it just outside the walls of the fwd base but not damaged.  :thumbsup:

Title: Re: Finally!!
Post by: AG-51_Bulldog on March 19, 2017, 09:12:21 PM

Awesome, I am going to have to get to work!!!

Title: Re: Finally!!
Post by: AG-51_Thud on March 19, 2017, 10:10:20 PM

Get'n a hang of it.  Two of the crates.  How to you unload the Humvees out of the crates?

Title: Re: Finally!!
Post by: AG-51_Bulldog on March 19, 2017, 11:05:51 PM

Go through you CTLD radio menu, I think once open it's like F4 the the Unpack crate option.

Title: Re: Finally!!
Post by: AG-51_Thud on March 20, 2017, 09:58:46 AM

Thanks Bulldog.  Not sure why I didn't see it before.   :thumbsup: